Lucky Clan Forum

Support => Suggestions, Ideas, Bugs => Topic started by: Qualzar on January 12, 2022, 05:51:18 AM

Title: request: Bucket Fill samples both the reference and current layer
Post by: Qualzar on January 12, 2022, 05:51:18 AM

Option for bucket fill to sample both the reference layer(s) and the current layer

specifically useful for when there might be gaps in line art, you can fill the gap and then fill the lineart without having to modify the reference layer/group

Title: Re: request: Bucket Fill samples both the reference and current layer
Post by: Lucky Clan on January 12, 2022, 08:37:47 AM

Just mark current layer as reference.

Title: Re: request: Bucket Fill samples both the reference and current layer
Post by: Qualzar on January 12, 2022, 09:33:05 PM

This might explain it better. Essentially filling the gaps in the lineart with the same layer you’re using as colors

https://media.discordapp.net/attachments/664442152054554657/931012403511042048/IMG_2311.jpg

Similar feature is found in CSP but I definitely understand that it would be low priority compared to other features.

Title: Re: request: Bucket Fill samples both the reference and current layer
Post by: Lucky Clan on January 13, 2022, 03:12:42 AM

Sorry but i don't understand. Just select layers/groups you want to sample from, and mark them as a reference.

Title: Re: request: Bucket Fill samples both the reference and current layer
Post by: Qualzar on January 13, 2022, 03:45:16 AM

Unfortunately that’s still different than what I mean, apologies if I’m having trouble describing it. I do understand the function of selecting the sampling source

The request would be allowing someone to bucket fill “reference and current-layer” as opposed to “reference or current-layer”

Title: Re: request: Bucket Fill samples both the reference and current layer
Post by: Lucky Clan on January 13, 2022, 05:45:14 AM

Ok, but you can just turn on "Reference" for both current layer and some other layer.

Title: Re: request: Bucket Fill samples both the reference and current layer
Post by: Qualzar on January 13, 2022, 06:30:22 PM

You can’t though. Unless there is a setting for it that I can’t find, the “reference” ticker reverts to “off” on all other layers when you enable it on a new layer. It currently only works on one layer or group at a time unless I’m missing something.

I’m guessing the underline means that a layer is reference. You can see the underline going away in addition to the option getting reverted for that layer

https://media.discordapp.net/attachments/664442152054554657/931328708097216602/RPReplay_Final1642116421.mp4

Edit: it has been mentioned that you can do this through the select-multiple tool and not by toggling it per layer. That’s good enough for now

Title: Re: request: Bucket Fill samples both the reference and current layer
Post by: Leonid Deburger on January 13, 2022, 06:53:51 PM

I can’t mark as “reference” multiple layers. It would be great though.

Title: Re: request: Bucket Fill samples both the reference and current layer
Post by: ggermain1 on January 14, 2022, 12:14:21 AM

I had the same trouble a while ago. You have to select the layers you want and then press one of the selected layers’ thumbnail image and then turn on “Reference”.

Title: Re: request: Bucket Fill samples both the reference and current layer
Post by: Leonid Deburger on January 14, 2022, 09:57:04 AM

So they have to be marked at once? Not very convenient. At least it works ^-^
Thanks!